|
|
CT Sim Robotic Laser Tracking System
CSP Item # 102-1589
GAMMEX Model A4000A-PCSYS2, w/PC, Monitor - Must add Installation Item #102-1799 CT-SIM-INSTALL
System consists of two fixed side-wall lasers and one overhead laser with a movable sagittal line
The Gammex CT Sim Robotic Laser Tracking System consists of two fixed side-wall lasers and one overhead laser with a movable sagittal line. The sagittal laser provides precise position in one dimension (x axis) and relies on the CT scanner couch motion for positioning in the second and third dimensions (Y and Z axes). All vital features of the CT Sim Robotic Laser Tracking System can be controlled by a remote pendant, or by using the workstation in our PC-SYS 2 systems.
Gammex lasers accept export coordinates from the treatment planning systems, allowing easy and accurate movement for location marking. Your choice of Gammex Probe+ red diode or ProbeG green diode lasers can be used for the fixed sidewall lasers and feature a wideview turret profile that allows mounting on angled walls. The ProbeG green laser provides enhanced contrast on various skin tones, and its unique design incorporates power stabilizing circuitry that extends diode life. The Probe+ (red) and ProbeG (green) lasers that are integrated into the A4000A and A4100G respectively provide the precision optics and reliability you have come to expect from Gammex lasers. Both systems feature the quick and easy hand adjustments for alignment that come with our Probe lasers and set us apart from the competition. Gammex is proud to boast zero drift on all of our systems. Our newest software is able to read data files from any treatment planning system currently on the market and read files that may already be integrated from other CT Sim system manufacturers.
A4000A system includes:
- One moving laser (choice of red or green diode)
- Two fixed side-wall lasers (choice of red or green diode)
- CT Sim software package
- Hand-held pendant
- CT Sim alignment phantom
- Software manual, calibration kit, controller box and all necessary cabling
- Gammex approved desktop computer
- 17 in flat panel LCD monitor
Installation not included.
Please see additional information tab for product specifications and warranty information.
Laser Beam Output
Power . . . . . . . . <1.0 mW (each beam) Laser Class II
Range . . . . . . . . 3 m
Line Width . . . . . <0.8 mm wide at 3.0 m
Line Length . . . . 1.0 m at 3.0 m
Drift . . . . . . . . . no measurable drift
Wavelength Red. . 6350 Å (635 nm) visible red
Wavelength Green . . . . . . . . 5320 Å (532 nm) visible green
Visibility . . . . . . visible even in strong ambient light
Laser Beam Adjustment
Length of travel . . 70 cm
Accuracy of travel ±0.5 mm at 3.0 m
Positioning accuracy . . . . . . ±0.5 mm at 3.0 m
Laser Dimensions
Laser Unit
(Moving). . . . . . . 112x21x9 cm (44x8.25x3.5 in) (HWD)
Probe+. . . . . . . . 17.3x14x8 cm (6.8x5.5x3 in) (HWD)
ProbeG . . . . . . . 27x14x8 cm (10.6x5.5x3 in) (HWD)
Power Module . . . 42x21x9 cm (16.6x8.25x3.2 in) (HWD)
Voltage requirements . . . 110/240 VAC
Certification
Complies with Center for Devices and Radiological Health regulations for Class II
lasers and all CE requirements.
(21 CFR 1040) (IEC 60825-1) (MDD 93/42/EEC).
Warranty
Lasers carry a one year warranty. Extended warranty available. Computer and
peripherals carry the original manufacturer's warranty only.
Minimum Requirements
Computer Gammex CT Sim Systems have specific hardware and software requirements. For ensured compatibility, Gammex recommends the purchase of the complete CT Sim system. The CT Sim software has been validated using the computer and flat screen
monitor provided with the complete system. If the Gammex supplied computer and monitor are not used, Gammex cannot guarantee software’s functionality and performance. Compatibility with user supplied computers is not warranted.
|
|
|
|
